If you ever plan to replace your capacitor, you’ll quickly find that there are many different kinds available and just as many opinions on which one is best. Here, we’ll take a look at ceramic disc and mylar capacitors and the differences between them.
Ever considered coil-splitting a Seymour Duncan ST59-1? If so, this article can help you. Coil-splitting is when you use a switch to shut off one of the coils in your humbucker pickup. When you do this, you get access to single-coil tones. It expands your sonic palette and is a straightforward and reversible mod.
Looking to wire a Seymour Duncan ST59-1? Let’s start with some basics: the ST59-1 is a mini-humbucker, designed as a direct replacement for the bridge pickup in a Fender Telecaster, but it will also work well in many other situations. The ST59-1 offers players hum-free operation and a thicker tone that still retains plenty of […]
What Do Capacitors Do In Your Circuit? Capacitors do many different things, but in your circuit, they do two main things.
DiMarzio Titan Coil-Splitting Coil-splitting is when you use a switch to shut off one of the two coils in a humbucker pickup. We split a humbucker because it gives us the ability to expand our tonal pallet, and allows us to achieve single-coil tones from a double coil pickup. Here, we’re going to show you […]
DiMarzio Titan Wiring The DiMarzio Titan is Jake Bowen’s signature guitar pickup, a humbucker designed to stand out in a three-guitar environment. This humbucker has a lot of emphasis on the midrange frequencies and stays clear under high gain situations. The Titan is a high output pickup that uses a ceramic magnet, and it’s installed […]
One of the most common problems that guitar players face is a worn out Volume or Tone control. You can tell when one is becoming worn out by the loud, scratching sound in your guitar signal when you turn the potentiometer up or down.
What is Coil Splitting? Coil-splitting is wiring a humbucker pickup to a switch that shuts off one of its two coils. We do this because it gives us the ability to expand our sonic range and get single-coil tones from our two-coil pickup.
In this post, we’ll show you how to wire a DiMarzio IGNO for your guitar. This pickup features DiMarzio’s patented dual-resonance design and scatter-wound coils, and it uses Alnico 8 magnets for greater output. The DiMarzio IGNO is a new humbucker developed for Polyphia guitarist Scott LePage.
Guitarists are always looking for ways to coax new and exciting tones from their guitars. One great approach is humbucker pickup splitting, which means using a switch to turn off one of the two coils in the pickup, causing it to sound and act more like a single-coil pickup. A split humbucker provides a crisper, […]
Guitarists are always looking for ways to get fresh tones. Amplifiers and effect pedals do a great job of shaping your sound once it leaves your guitar, but there are also many simple modifications that you can make right in the body of your guitar, thereby unlocking a world of new tones.
Coil-splitting humbuckers Many of our mini toggle switch FAQs begin with an inquiry into whether or not you can coil-split just any humbucker. Theoretically, any humbucker can be split, but in practice, it’s dependent upon the way the manufacturer has built the pickup. To split a humbucking pickup, you need one with four lead output […]