Wiring Diagram – Gibson HB – HH – 2X Volume, 1X Tone – Toggle Switch

In this post, you’ll find the details needed to wire up a set of Gibson HB pickups. This configuration is fairly straightforward. Each pickup has a volume control, and there is one master tone. All three of these pots are 500K ohms. The pickup selector in this case is a standard toggle switch, just as you would find in a Gibson Les Paul. The red wire is the “hot,” the black and bare wires go to the ground, and the white & green wires are soldered together.

• Bridge Pickup: Gibson HB
• Neck Pickup: Gibson HB
• 2 X Volume – 500K
• 1 X Tone – 500K
• Les Paul Style 3-way toggle switch