In this post, you’ll find the details needed to wire up a set of Railhammer Hyper Vintage humbucker pickups with pickup-splitting capability. This configuration is fairly straightforward, with one push-pull pot for a master volume and one push-pull pot for a master tone. Both of these pots are 500K ohms. In this case, the selector is a standard toggle switch, just as you would find in a Gibson Les Paul. With Railhammer humbuckers, the black wire is the “hot,” the green wire goes to the ground, and the red & white wires are soldered together.
- Bridge Pickup: Railhammer Hyper Vintage
- Neck Pickup: Railhammer Hyper Vintage
- 1 X Volume – 500K – Push-pull for coil splitting
- 1 X Tone – 500K – Push-pull for coil splitting
- Les Paul Style 3-way toggle switch
