Mini Toggle Switch FAQ – Coil-Split a Humbucker Pickup

mini toggle switch faqIf you have ever thought about using a mini toggle switch to split a humbucker guitar pickup, you may have a few questions about how to go about it.

Coil-splitting humbuckers

Many of our mini toggle switch FAQ begin with an inquiry into whether or not you can coil-split just any humbucker. Theoretically, any humbucker can be split, but in practice, it’s dependent upon the way the manufacturer has built the pickup. To split a humbucking pickup, you need one with four lead output wires, because they are actually the beginning and end — or positive and negative — of each coil. Humbuckers are designed to connect the end of one
coil to the beginning of the second.

Continue reading “Mini Toggle Switch FAQ – Coil-Split a Humbucker Pickup”

Preamp Tube FAQ: 12AX7, 12AT7, and 12AU7

preamp tube faqHave you been scratching your head about 12AX7, 12AT7, and 12AU7 Preamp Tubes? Well, our most frequently asked questions about them are answered here.

Preamp Tube FAQ: What do Preamp Tubes do?

Preamp Tubes amplify the very low signal coming from your guitar. The amplified signal is better prepared to go through the circuitry of your amplifier. This amplified signal then goes to your EQ controls, your Reverb, Auxiliary Outputs, and also into your Output Tubes. All tubes are essentially mini amplifiers within your amplifier.

You might also like this HumbuckerSoup article: What is the Difference Between the 12AX7, 12AT7, and 12AU7 Preamp Tubes?

Continue reading “Preamp Tube FAQ: 12AX7, 12AT7, and 12AU7”